high temperature resistance (flame resistance) power cable -尊龙登录



high temperature resistance (flame resistance) power cable

http://www.ahdqjt.com     time: 11/07/10 09:42

  it is used as power transmission cable for electric equipments of rated voltage 0.6/1kv or lower in bad environment or that with high temperature.

executive standard: enterprise standard

performance in usage:

  1. rated voltage u0/u: 0.6/1kv
  2. max. working temperature allowed by cable is 200℃ for cable with fluoroplastic insulation and sheath, 105℃ for cable with fluoroplastic insulation, 105℃ heat resistance and pvc sheath, and 180℃ for cable with fluoroplastic insulation and silicon rubber sheath.
  3. max. temperature of cable conductor is no more than 250℃ during short circuit(the longest lasting time is no more than 5s)
  4. temperature for installation is no less than -15℃
  5. bending radius of cable as follows:

it is no less than 20 times that of cable outer diameter for cable with single core
it is no less than 15 times that of cables outer diameter for cable with 3 cores

  1. power cable with fluoroplastic insulation and sheath has good features of chemical corrosion resistance, high temperature resistance and flame retardance

type and description:


type

description

ff

high temperature resistant power cable with f46 insulation and sheath

ff22

high temperature resistant power cable with f46 insulation and sheath, steel tape armoring

(zr)-fg

high temperature resistant power cable with f46 insulation(flame retardant) and silicon rubber sheath

(zr)-fg22

high temperature resistant power cable with f46 insulation(flame retardant), silicon rubber sheath and steel tape armoring

(zr)-fv

high temperature resistant power cable with f46 insulation(flame retardant), 105℃ heat resistance and pvc sheath

(zr)-fv22

high temperature resistant power cable with f46 insulation(flame retardant), 105℃ heat resistance, pvc sheath and steel tape armoring.

specification of cable
“core number * nominal cross section” stands for cable specification. please see the following table for core number and nominal cross section.

type

core number

nominal cross section area(mm2)

ff

1,2,3,4,5,3+2,3+1

1.5~95

ff22

2.5~70

(zr)-fg, (zr)-fv

1.5~240

(zr)-fg22, (zr)-fv22

2.5~240

 


网站地图